By Dave Sully - (Barberville, Florida) The Williamson Racing Team peaked on the final night, turning in their best performance of the week in their big block debut in Florida. Buoyed by a strong 11thplace finish on Friday, when Mat won his consi and then moved up from his twenty-first place starting spot, he outdid himself on Saturday, timing fourth overall, which put him on the front row in his heat. Concerning that qualifying effort Mat revealed, “Just a combination in the setup. We changed the carburetor, and I learned the track a little bit more by the time we got to time trial on Saturday.
He grabbed the lead at the drop of the green and wound up holding off none other than Danny Johnson for most of the race, crossing the line in first, for his second checkered flag of the week. Mat noted, “Actually, I didn’t sense that Danny was back there. I didn’t know how close he was. That was good.”
Mat drew six in the redraw, and, after being shuffled back at the start, reasserted himself and finished a solid seventh, putting him 16th in points, despite not qualifying on Thursday. Mat explained, “We struggled early. I was trying to putt around the bottom, but I kept getting tight off, so I started to roll the middle there and then got past a couple cars that got past me earlier. We just got a good race going.” It was a fine performance for the whole team, and Mat thanked them profusely whenever he could.
As has been stated often, the trip was meant to be a learning experience, and it certainly was. It gives them a leg upon the competition when the season starts, especially in the big blocks. Mat put it this way, “It was a good end to the week. It felt good to get our stuff together before anyone else at home.”
Of the overall experience Mat concluded, “It was great. I loved it. It was a great experience. I’m pretty happy with the way everything went down.” After the initial success on opening night, things went down hill on Thursday. What turned things around? Mat responded, “We put Matt’s (Sheppard) setup in, and we figured out that I don’t drive like him, so we put our setup back in and started running better. It felt good.”
Things stay busy, as Mat noted that they have to get back to St Catharines to put a small block car together for a car show coming up. You can bet they’ll be in a good mood for the task, following their success in the Sunshine State.
Monday, 25 February 2013
Saturday, 23 February 2013
Williamson Racing Team Bounces Back Big Time on Friday at Volusia
By Dave Sully - (Barberville, Florida) After Thursday night when the team struggled and the learning curve took a dip, Mat declared that they would figure it out and come back strong. You always feel like you’re going to do that, and Mat was indeed prophetic as the team bounced back to record its best performance of the week.
The team put a setup in the car they were familiar with, made the right tire choice, and Mat showed that he was becoming familiar with the nuances of the big half mile.“We scaled the car yesterday and got it back to what we run at Merrittville, and it’s been pretty good since then,” Mat explained. “We basically tried to do what Matt (Sheppard) did with his race car, but it didn’t work. It’s learning curve. We had to try it. We need to work slowly to get better with what we have.”
Mat explained, “We went out for hot laps and the carburetor started bubbling. We got in and changed that and went back out for the heat. We were decent. It’s hard to pass. We went out for the consi started on the outside pole, got out front and won by half a lap. It felt good to just win down here, even if it’s just a consi. Hopefully we can time trial a little better on Saturday. We’re in a tough group. We’ll figure it out. We’ll get it. ”
That finish put him in 21st starting spot for the feature.
“Was the improvement due to the driver or the setup?” I asked.
He replied, “I think it was a little bit of both. We’re coming down here to a new track. It’s definitely hard if you don’t have your own setup. At least I knew the race car, so I could learn the race track instead of learning both at the same time. We’ve run into problem after problem this week.”
In the feature, he drove a solid race, passed some cars, stayed out of trouble and finished a solid eleventh, which was a great morale builder for the team going into the final night on Saturday.
The team put a setup in the car they were familiar with, made the right tire choice, and Mat showed that he was becoming familiar with the nuances of the big half mile.“We scaled the car yesterday and got it back to what we run at Merrittville, and it’s been pretty good since then,” Mat explained. “We basically tried to do what Matt (Sheppard) did with his race car, but it didn’t work. It’s learning curve. We had to try it. We need to work slowly to get better with what we have.”
Mat explained, “We went out for hot laps and the carburetor started bubbling. We got in and changed that and went back out for the heat. We were decent. It’s hard to pass. We went out for the consi started on the outside pole, got out front and won by half a lap. It felt good to just win down here, even if it’s just a consi. Hopefully we can time trial a little better on Saturday. We’re in a tough group. We’ll figure it out. We’ll get it. ”
That finish put him in 21st starting spot for the feature.
“Was the improvement due to the driver or the setup?” I asked.
He replied, “I think it was a little bit of both. We’re coming down here to a new track. It’s definitely hard if you don’t have your own setup. At least I knew the race car, so I could learn the race track instead of learning both at the same time. We’ve run into problem after problem this week.”
In the feature, he drove a solid race, passed some cars, stayed out of trouble and finished a solid eleventh, which was a great morale builder for the team going into the final night on Saturday.
Friday, 22 February 2013
Team Struggles on Thursday at Volusia; Vows to Persevere
By Dave Sully
As hard as it was to qualify on opening night, the job got considerably more daunting on Thursday. With the machinations of the pill draw to determine time trial groups, which set the lineup for the heat races, Mat found himself sharing the track with an All Star Team, which included Brett Hearn, Stewart Friesen, Danny Johnson, and Andy Bachetti, among others.
Needless to say, things didn’t go well in the time trial session, with Mat ending up ninth out of ten, placing him in an unenviable position. He ended up finishing ninth out of ten in the heat, relegating him to the second consi to try to make the show. With only two qualifying spots available, it was going to be an uphill battle, with passing at a premium any way. Mat ended up 7th in the consi and didn’t make the feature.
“We’re struggling right now, “ Mat remarked. We’ve got to get back to the basics. We’re trying different things. Last night, we ran the same setup as Matt (Sheppard), but it didn’t help. The bottom of the track (where Mat traditionally likes to run) was soup and tacky, while the top was only one lane, so that made things even tougher. We’ll figure it out.”
It would be easy to get discouraged, but putting the whole experience in perspective, the team’s goal is to get big block seat time and experience at a big fast half mile. Whatever the results, they are getting that experience, and, hey, you can’t beat the weather.
As hard as it was to qualify on opening night, the job got considerably more daunting on Thursday. With the machinations of the pill draw to determine time trial groups, which set the lineup for the heat races, Mat found himself sharing the track with an All Star Team, which included Brett Hearn, Stewart Friesen, Danny Johnson, and Andy Bachetti, among others.
Needless to say, things didn’t go well in the time trial session, with Mat ending up ninth out of ten, placing him in an unenviable position. He ended up finishing ninth out of ten in the heat, relegating him to the second consi to try to make the show. With only two qualifying spots available, it was going to be an uphill battle, with passing at a premium any way. Mat ended up 7th in the consi and didn’t make the feature.
“We’re struggling right now, “ Mat remarked. We’ve got to get back to the basics. We’re trying different things. Last night, we ran the same setup as Matt (Sheppard), but it didn’t help. The bottom of the track (where Mat traditionally likes to run) was soup and tacky, while the top was only one lane, so that made things even tougher. We’ll figure it out.”
It would be easy to get discouraged, but putting the whole experience in perspective, the team’s goal is to get big block seat time and experience at a big fast half mile. Whatever the results, they are getting that experience, and, hey, you can’t beat the weather.
Florida Trip a Learning Experience for the Williamson Racing Team
By Dave Sully -
No one said it was going to be easy when the team unloaded at Volusia Speedway Park inBarberville, Florida, and it wasn’t. Moving from a small block to a big block doesn’t seem like a quantum leap, but most drivers, including Mat, will tell you it’s not as seamless as it looks. There are significant differences in the two cars, and when you find yourself on the national stage while you’re sorting things out, it can be daunting.
Of his first impression of Volusia, he observed, “It was good. It’s fast, definitely fast. The big block is a different animal. I just have to get more seat time to figure out how to tame it.”
The team was allowed to hot lap on Tuesday night and Mat was about in the middle of the field as far as lap times. He got a little better, and then the rest of the field began to get faster. When they time trialed for the first race on Wednesday, Mat was near the bottom of his group, which forced him to start near the back of his heat. “The track changed and I didn’t have the experience to figure it out as fast as everybody else did,” he noted.
He ended up finishing eighth out of ten cars, which put him seventh on the grid for his consi. He had a good run in the consi and grabbed the third and final qualifying spot for the feature, pretty heady stuff for sure. “I was pretty pumped up. I found the outside before everybody else did. We got some breaks that put us into a qualifying position. We were good once we got to the consi. Up until then we were struggling. Even in the feature I think we went a step backward after the consi.”
In the feature, he started 25th and was able to move up as high as 19th when he had a problem with tear-offs. “When we came to the feature later on I didn’t have time to put enough tear-offs on, went out with fourteen and ran out by lap 8. We have to conserve them. We’ve taken some measures, like taping off the wind screen.” The tear-off problem made him decide to pull in on lap 25 of the 30 lapper. While Mat ran out of tear-offs early in the race, he was not alone. Brett Hearn, Matt Sheppard, HJ Bunting, and several others were plagued with the same problem due to the track conditions.
Of the effort in the feature, Mat opined, “I don’t know if it was more the car, or if I couldn’t see in the feature. We’re going to figure it out for tomorrow. We’re going to scale it over. Matt (Sheppard) helped us a lot with the setup tonight. Hopefully, we’ll get there.”
Still in all it was a good learning experience and the team looked forward to Thursday night with guarded optimism.
No one said it was going to be easy when the team unloaded at Volusia Speedway Park inBarberville, Florida, and it wasn’t. Moving from a small block to a big block doesn’t seem like a quantum leap, but most drivers, including Mat, will tell you it’s not as seamless as it looks. There are significant differences in the two cars, and when you find yourself on the national stage while you’re sorting things out, it can be daunting.
Of his first impression of Volusia, he observed, “It was good. It’s fast, definitely fast. The big block is a different animal. I just have to get more seat time to figure out how to tame it.”
The team was allowed to hot lap on Tuesday night and Mat was about in the middle of the field as far as lap times. He got a little better, and then the rest of the field began to get faster. When they time trialed for the first race on Wednesday, Mat was near the bottom of his group, which forced him to start near the back of his heat. “The track changed and I didn’t have the experience to figure it out as fast as everybody else did,” he noted.
He ended up finishing eighth out of ten cars, which put him seventh on the grid for his consi. He had a good run in the consi and grabbed the third and final qualifying spot for the feature, pretty heady stuff for sure. “I was pretty pumped up. I found the outside before everybody else did. We got some breaks that put us into a qualifying position. We were good once we got to the consi. Up until then we were struggling. Even in the feature I think we went a step backward after the consi.”
In the feature, he started 25th and was able to move up as high as 19th when he had a problem with tear-offs. “When we came to the feature later on I didn’t have time to put enough tear-offs on, went out with fourteen and ran out by lap 8. We have to conserve them. We’ve taken some measures, like taping off the wind screen.” The tear-off problem made him decide to pull in on lap 25 of the 30 lapper. While Mat ran out of tear-offs early in the race, he was not alone. Brett Hearn, Matt Sheppard, HJ Bunting, and several others were plagued with the same problem due to the track conditions.
Of the effort in the feature, Mat opined, “I don’t know if it was more the car, or if I couldn’t see in the feature. We’re going to figure it out for tomorrow. We’re going to scale it over. Matt (Sheppard) helped us a lot with the setup tonight. Hopefully, we’ll get there.”
Still in all it was a good learning experience and the team looked forward to Thursday night with guarded optimism.
Saturday, 19 January 2013
Williamson Race Team Heads to Florida in February
By Dave Sully
The 2013 racing season for the Williamson Racing Team gets off to an early start this year as the crew has made plans to field a big block at Volusia County during Speed Weeks at Daytona, starting on February 18th. Volusia is a big half mile track located twenty miles west of Daytona in Barberville, Florida. It has a lot of room to race and the cream of the crop comes down during Speed Weeks, with the WOO Sprint cars, the WOO Late Models, and the UNOH E-Mods sharing the stage with the Big Blocks. Occasionally some NASCAR drivers participate. Last year Clint Bowyer and Kenny Wallace fielded E-Mods, and Tony Stewart has driven a late model there as well. You never know who might show up.
The team has been busy preparing a new chassis for the Big Block effort, which will continue in the regular season. After a successful venture last season at the Dirtcar race in Michigan, with Mat driving Matt Sheppard's backup car, to an impressive finish, the team acquired a big block motor from the Sheppard team and will campaign that at Volusia and during the regular season. The new car is an experimental design, as BRP continues its unending quest for improvement in its products and cars. There will be four of the newly designed machines at Volusia, with Justin Haers, Stew Friesen, and Matt Sheppard joining Mat in giving the new configurations some serious race testing.
A hardy group will be making the trek to Florida to assist the Williamson Racing Team, with Dipper, dad Randy, and Rob Sawatsky as crew for Mat, with the valued Cliff Warner and Bonnie Robison along as well. Moral support in the form of Grandma and Grandpa will fill out the cast of characters who will be cheering on the No. 6.
The Florida trip is important because, in addition to providing insight into the new big block design, there are features that will be incorporated in the small block car that Mat will campaign at Merrittville and in the 358 Series when the regular season starts. Current plans have the team running the big block on Fridays at Lernerville and the small block on Saturdays at Merrittville. They will start out running the Dirtcar 358 Series, but plan on concentrating on the Super DIRT Series. The determining factor will be how they are faring in the 358 Series. That will dictate how many of each series they run.
As in any endeavor, but especially racing, various factors can affect the way things actually play out, but that's the way things look at this time. Since yours truly winters in Florida and is enjoying the pleasant weather, I will be on hand for Speed Weeks and will be able to supply first hand information right here. Stay tuned.
The 2013 racing season for the Williamson Racing Team gets off to an early start this year as the crew has made plans to field a big block at Volusia County during Speed Weeks at Daytona, starting on February 18th. Volusia is a big half mile track located twenty miles west of Daytona in Barberville, Florida. It has a lot of room to race and the cream of the crop comes down during Speed Weeks, with the WOO Sprint cars, the WOO Late Models, and the UNOH E-Mods sharing the stage with the Big Blocks. Occasionally some NASCAR drivers participate. Last year Clint Bowyer and Kenny Wallace fielded E-Mods, and Tony Stewart has driven a late model there as well. You never know who might show up.
The team has been busy preparing a new chassis for the Big Block effort, which will continue in the regular season. After a successful venture last season at the Dirtcar race in Michigan, with Mat driving Matt Sheppard's backup car, to an impressive finish, the team acquired a big block motor from the Sheppard team and will campaign that at Volusia and during the regular season. The new car is an experimental design, as BRP continues its unending quest for improvement in its products and cars. There will be four of the newly designed machines at Volusia, with Justin Haers, Stew Friesen, and Matt Sheppard joining Mat in giving the new configurations some serious race testing.
A hardy group will be making the trek to Florida to assist the Williamson Racing Team, with Dipper, dad Randy, and Rob Sawatsky as crew for Mat, with the valued Cliff Warner and Bonnie Robison along as well. Moral support in the form of Grandma and Grandpa will fill out the cast of characters who will be cheering on the No. 6.
The Florida trip is important because, in addition to providing insight into the new big block design, there are features that will be incorporated in the small block car that Mat will campaign at Merrittville and in the 358 Series when the regular season starts. Current plans have the team running the big block on Fridays at Lernerville and the small block on Saturdays at Merrittville. They will start out running the Dirtcar 358 Series, but plan on concentrating on the Super DIRT Series. The determining factor will be how they are faring in the 358 Series. That will dictate how many of each series they run.
As in any endeavor, but especially racing, various factors can affect the way things actually play out, but that's the way things look at this time. Since yours truly winters in Florida and is enjoying the pleasant weather, I will be on hand for Speed Weeks and will be able to supply first hand information right here. Stay tuned.
Monday, 12 November 2012
Meet the Team- Randy Williamson
Randy Williamson
is, of course, Mat’s father. Being the father of a young and talented driver is,
in itself, a challenge, with the parental concern for his son’s safety, along
with his fervent desire that he perform well. There is, however, another dynamic
at work, the family businesses, BRP and Merritville Speedway.
As if running a business and a
race track weren’t enough, Mat is in need of a father’s guidance and
inspiration, as well, which brings with it an unusual dilemma for Randy and his
son. The nature of the business requires that Randy spend countless hours
counseling drivers and race teams on how to get better, a good number of them
who race against Mat. Reconciling that can mean walking a tight rope, at times.
Mat’s racing
career began at the age of five, racing karts. When he reached fourteen, Randy
and wife Tracey decided it was time for Mat to take the next step. After a brief
dalliance with the idea of racing a Mod Lite, it was decided he would go right
to the Sportsman division
Randy recalled Mat’s first
year driving the Sportsman in 2003, saying, “I told him, ‘Don’t get in trouble
racing against these veteran guys.’ He actually ran pretty well. The first week,
he didn’t get lapped. The second week he finished around tenth, and the third
week he was actually leading the race. He had about a straightaway lead with
about three laps to go, and the guy running second at the time was our track
champion, Wayne Conn, who is now on our race team. Wayne pulled up beside him
a couple times and I guess he startled the kid. Mat blew into turn one and spun
himself out. Luckily, the field missed him and Wayne went on to win the race. We finished at
the back, but I think it was a good learning experience for Mat- to take the
pressure that’s given to you and do the best you can.”
Randy sees his main duty on
the crew as advisory, but he can be found at crew chief Rick “Dipper” Windeatt’s
shop in Ridgeway on Wednesday nights working on the car with the rest of the
team. He also travels to Series events and other tracks with the team, when time
allows, spending much of his time fielding questions from other teams who are
running BRP cars, as well as making suggestions for Mat.
While he certainly has input
in the setup for the car on race nights, which is his specialty, he points out,
“On Saturdays, with my other duties, I don’t spend my nights with them at
Merrittville. The crew takes care of it. We’ve got Rob Sawatsky and Wayne Conn
to kind of oversee the racing prep for the car. Uncle Dipper takes care of the
race team, whose other members include Teddy Renshaw, Charlie King, and Ronnie
Sumbler, who have been there over the years. Also, there is Bobby Paladichuk,
who was a NASACAR official, who has considerable knowledge. The guys we have
surrounded us with are great people. If anyone wants to give me advice, I’m
always willing to listen. One thing about racing is, if you’re not willing to
give 110%, you shouldn’t be racing.”
The dilemma, as noted, comes
with the need for Randy to dispense information to his son’s potential
opponents. Randy reconciles this by noting, “That’s the business. My son isn’t
going into NASCAR racing. He’s going to do the best he can do at local dirt
track racing. His ultimate goal is to go Big Block racing. Certainly, the future
has him taking over my role in the business, when I retire. He understands. At
some points, he’s like any other racer. He doesn’t want to give away the secrets
that he learns, but I don’t learn the secrets if we don’t try them on the race
car. A lot of time, it’s my decision as to what we’re going to try. It could be
good, and it could be bad. We had one night where I wanted to try a right rear
shock on the race car and Mat really didn’t agree. We lent John Miller a set of
rear shocks that Mat had won with the previous week. Miller liked them so much,
I told him he could keep them. I’d sell them to him. When we got to the race
track on Saturday, I forgot that I didn’t have another shock like that for the
right rear. Mat was a little disgruntled because we had just won with it the
week before. I said that it’s about time we tried something else. I put a shock
on the right rear; he hated it, and we ran terrible. I don’t know if it was mind
over matter with the driver, or it was the car not handling very well. I think
he started ninth and finished eleventh. If we didn’t try it, we wouldn’t know if
it was good or bad, but the funny part of it is, I turned around and sold that
same shock to Travis Braun, and he loved it. Travis always kids me and says, ‘If
you’ve got any more shocks that Mat doesn’t like, send them over my
way.’”
Randy scoffs at the notion
that he might hold out information from other Bicknell drivers to help his son,
“I’ve always had the open door policy. If you don’t believe that I’m telling you
the truth, there’s my son’s race car. Measure it up. I’ll help you out any time.
Sometimes, Pete’s crew doesn’t like me giving out some of the information, but
the big picture is that building on Cushman Rd (BRP). That big building is what
got me where I am now, and it’s allowed my son to race and have some fun.”
Notwithstanding the balancing act he has to juggle
between the businesses and Mat’s racing career, be assured that Randy is an
integral part of the race team, exulting in his son’s success and counseling him
through the rough spots. Through it all, he shares Mat’s competitive spirit,
while trying to keep the big picture in perspective. It’s been an interesting
journey for the man who got his start in racing by hitching a ride with Pete
Bicknell a long time ago. That he is now a successful businessman, an iconic
figure in the sport he loves, and a key member of his son’s racing team has made
the trip well worthwhile.
Sunday, 11 November 2012
Williamson Racing Team- Meet the Team- Dipper

Dipper is the unquestioned conductor of the Williamson Racing Team train. Every team needs a coordinator, not necessarily a boss, and the garrulous 52 year old, Dipper, who drives a tow truck to pay the bills, fits that role to a T. He is intensely dedicated to racing in general and the racing team in particular. The car is garaged at the shop at his home in Ridgeway, which affords him the opportunity to work on it when time allows, along with the regularly scheduled work night, when other members of the team participate. He readily accepts the responsibility of making sure that the car is prepared and at the race track at the required time. In fact, he is usually the first one in line at the pit gate, at home (Merrittville) and on the road. Being early is a fetish with him (there is regular time and there is “Dipper time”), as is enjoying the fruit of the barley after the races, which gives him great satisfaction, as well.
On race nights, assuming his mantle as crew chief, he can be found working on every aspect of the car, in addition to assigning various tasks to the crew members on hand that night. He’s also responsible for having all the equipment, tires, spare parts, tools, or anything else that may be needed on a given night. He even makes sure the coolers are filled. If he’s not grinding tires, he’s checking something on the engine, the gears, the shocks, or just making sure everybody has what they need to get the job done. During the races he makes sure they are ready if Mat needs to come in for any reason. Afterward, he joins with the rest of the team to put things away, load the car, and hold court on what transpired that evening for the sponsors and the many fans who come to visit the pits at the end of the night. A few cool ones usually put the exclamation point on the evening.
Dipper sums it up this way, “I oversee everything. On Wednesday night, everybody shows up and works on the car. I’ve got the cars prepared, so we can spend three hours on Wednesday night to get them ready to go racing. If something drastic happens, we may spend time on other nights, but I maintain everything.”
As iconic as his brother-in-law Randy Williamson’s name is around the dirt racing circuit, the name Dipper has a large following of its own. It seems like everybody at the race track knows him, which brings me to the next point. Where did the name “Dipper” come from? He explained, “When I was sixteen years old, I met Dave Lape. He was coming up here to race and used to hang around with the guys from Ransomville. I was working at Ransomville and Merrittville at the time. He used to call me ‘Dipstick’ for hanging around the race track. That’s where it came from. It went from ‘Dipstick’ to ‘Dipper,’ probably when I was about eighteen. They started calling me ‘Dip’ or ‘Dipper,’ and it just stuck. Everybody has called me ‘Dipper’ since then. My mom and dad even call me that now.”
Dipper’s introduction to the sport came through noted car owner, Bill Morton, who lived near a couple of his buddies. Morton had guys like Dave Moore, Harry Sittler and others drive for him. They used to hang out at the shop, and they also used to go to Merrittville. Upon arriving in high school, he got to know Pete Bicknell and Dave Rizzardo, who had built a race car at their high school. He also went to high school with Randy. He recalled, “I just started hanging around with those guys, going racing. I went from the grandstand to being on the pit crew, and then became an official at Ransomville. I did just about anything you could think of at the race track. I was the assistant starter to Barry Davidson at Ransomville. I packed the rack, watered the track, cut the grass, stocked the shelves, worked the corners, whatever they needed.”
He continued, “When Randy and Pete bought Merrittville, I became a track official there for the first two years. I was head of security, and was also involved with getting the track ready to open. I basically built the bar at Merrittville. We bought a portable building, which was an idea that arose when they first bought the track. Then I built the deck all the way around it and had a friend build the bar. That’s why they named it ‘Dipper’s Turn One Bar.’”
Once the track was established, Mat, who had been racing karts for years, came of age. Dipper noted, “Randy said, ‘Let’s get Mat in a car.’ They were going to build him a dwarf car, but Pete said, ‘Let’s have him in a sportsman.’ So, we formed ‘Mat Williamson Racing.’” The first two members were Dipper and former racer Teddy Renshaw, who ran the operation the first few years. As time went on Rob Sawatsky became involved, bringing sponsorship and technical knowledge, along with Wayne Conn, who supplied additional valued sponsorship and, as a former sportsman and modified driver, on-track expertise. Charlie King, Ronnie Sumbler and others joined at various junctures.
A lot goes into running a race team. To keep it simple for the group involved with the endeavor, Dipper is the owner of the cars. He also owns most of the equipment involved with the operation, including the truck and the hauler. As noted, he provides the team with the materials they need to succeed and spends countless hours working on the cars. However, on race nights, Randy, Rob, and Wayne put the race setup in the car and make the needed adjustments, using Randy’s unparalleled set-up knowledge, past experience compiled by Rob and feedback from Mat. Wayne consults with Mat about the car’s handling. Dipper wouldn’t have it any other way.
On top of everything else, he does, Dipper is well known for the superb pit parties he throws several times a year, which brings up another one of Dipper’s credos. He observed, “I always look after my sponsors. My main concern is my sponsors and my crew looking good. I’ve always had crew shirts and pants, and I’ve always had parties. I used to do a pig roast at the track every year for my sponsors. As it stands now, I do a party every month with food, so if one of my sponsors can’t make it one month, he can possibly make it to another. Every sponsor gets a calendar and is kept informed as to where we’re racing, what we’re doing, and when the parties are.” He is ably assisted with the parties by a bevy of loyal helpers, including sister, Tracey Williamson, his mother, Marlene, who also does a great job as the unofficial team historian, Bonnie
Robison, and other friends of the team, but there’s no question that it’s Dipper’s show.
Dipper considers the toughest part of his job is keeping everything in perspective when things aren’t going well. When the going gets tough and nerves get frayed, there needs to be someone to keep equanimity within the group. He noted, “When you’re going through a bad period where you’re breaking, wrecking or missing the setup and everybody’s down, that’s where I get angry and frustrated, as well, but I’ll always be there. I might be stressed out, but I’m there. I’ve never missed a race that Mat has been in. Mat has been in 348 races, and I’ve been to every one.”
Asked his ultimate goal, Dipper didn’t hesitate. He replied, “It’s to win the points championship at Merrittville Speedway when Pete (Bicknell) is still in his prime. Right now he is the king. My goal is to beat the master. For three years we’ve finished second to him, and every year we’re getting closer.”
After that, he suggested that big blocks might be in the future as well. “Whatever Mat wants to do, I’m there,” he added. Of course, Mat often has a hefty shopping list and, though Dipper would love to give him everything he wants, reality, in the name of finance, rears its ugly head. As the “Chancellor of the Exchequer,” he has to tell Mat they can’t afford it.
Rick “Dipper” Windeatt is racing’s “Everyman.” He loves what he does and is very good at it. The success of the team and the multitude of friends he has made pay homage to that. Here’s hoping he can enjoy his passion for many years to come.
Subscribe to:
Posts (Atom)